Argus, This is what I initially tried, I changed the screen to the lowest available generic android tablet screen and worked from there, it ended up becoming a mess even with anchoring on higher resolution devices so I tried out layouts, but that made it worse on my two test devicesby RobertLeo - WinDev Forum
and on top of that, would it be better if I modify the sizing to a specific device? Because the test device I use is a Samsung Tab A (2019) ( 1200 x 1920 pixels, 16:10 ratio (~224 ppi density)), and the only platform template available that is close to it is the Samsung Tab 4 10.1, but the resolution is far different, and when attempting to deploy to the tablet there is a large empty space at theby RobertLeo - WinDev Forum
Hello everyone, I am trying to add a new platform into the choice of platforms for layouts but there doesn't seem to be any option to do so? And I am limited to only 1 platform that I was able to add in the initial wizard but nothing more beyond that, can anyone help? And is there any way to modify the existing platform on layouts?by RobertLeo - WinDev Forum
Cabinetman, Thank you for the tip, I am not sure why I never got the notification for this reply but alas. I have tried what everyone has told, I shrunk the project's resolution to the lowest tablet resolution in windev (945x456) and while it works on my low res tablet (while needing minor tweaks here and there), it becomes a mess in high resolution tablets like the samsung A7 tablet (by RobertLeo - WinDev Forum
Stefan, Alright I need to read up more on how to implement either SOAP then, thanks as for my app, the purpose is to give doctors and patients an app that'd allow them to have similar functions they'd have in a clinical management system, but on the go (as in no need to walk-in to make an appointment), that's about all I can say about itby RobertLeo - WinDev Forum
Stefan, thank you for the information, I will have to do some checking on the scope of the project to see which DB I would end up using for it. To everyone else, In the case of a large project that requires data stored within the local db to only be the user's and nobody else (to adhere to HIPAA), as well as synchronize the data in the cloud db without harming/modifying data(s) belby RobertLeo - WinDev Forum
ArieM, Thank you for the reply, I guess that means the retailer had essentially lied to me, kind of explains why he was pushing for the MySQL connector now that I think about itby RobertLeo - WinDev Forum
ArieM, Thanks again, I will check it out, but on the webservice can I run/make it with using webdev instead of windev? Argus, That is odd, because that is what I was told by the retailer I got WM and WB fromby RobertLeo - WinDev Forum
ArieM, if it is possible can I have an example of your app? And I am honestly unsure on how it will work out on my app, because there will be hundred thousands of records with pictures included within. Ah, that may be a problem, because I have webdev 24, but no Windev. And can you elaborate on what do you mean by 10 simultaneous users? Is it for the engine? And do you mean 10 users using weby RobertLeo - WinDev Forum
Greetings everyone, I would like to know if it is possible to change the error message that appears whenever an error occurs? Because I need to change the error pop up when the device handling the application from showing the IP address of the database it is connected to to simply something like "Could not connect to application, please check your connection or try again at a later time&qby RobertLeo - WinDev Forum
ArieM, Thank you for the information, in your experience, does including the database in the app itself cause the apk to increase in size? And do I need windev and webdev to be able to do this?by RobertLeo - WinDev Forum
ArieM and Stefan, Thank you for the insight, but for the sake of dispelling my confusion, when the both of you say local database, do you mean include the database within the app/phone or do you mean something else?by RobertLeo - WinDev Forum
Stefan, wouldn't using a local database bloat the apk size? Or is my understanding of local DB wrong?by RobertLeo - WinDev Forum
Stefan and Argus, I thank the both of you for your input in this regard, and truth be told, I am at a loss on how to deal with the database, because at the moment we are using a direct connection to a HFSQL-centered cloud, which in retrospect, may be fine for an alpha build of my application, but moving forward I am considering on which option I can choose, because I recall that one of the bigby RobertLeo - WinDev Forum
Hello everyone, I am wondering if it is possible to convert HFSQL to Mysql and what are the methods I can take, and is there any ramifications for using Mysql for android/ios apps outside of the need to create REST to connect the app to the DB?by RobertLeo - WinDev Forum
I think he meant on how to add the dependencies for firebase and google play services in the app generation, because in the video provided in the forum page you posted, specifically on the "intégration de dépendances distantes" at 2:51 of the video, the dependencies for firebase and google play were already installed Popoy Wrote: -----------------------------------------------------by RobertLeo - WinDev Forum
Hello guys, I have a problem with looper display. I have a search bar, when inputted, the data that should appear is only 2 data show up but instead, more than 2 data, and it repeats itself, what should I do so that the data doesn't appear as duplicates? this is my code in the search bar sm_QryParamedic.Paramsm_paramedicName = FindBar LooperDisplay(Looper_Doctor,taReExecuteQuery)by RobertLeo - WinDev Forum
Greetings everyone, I want to ask if it is possible to make a chat system on Windev Mobile, if so what do I need to prepare? And another thing, is it possible to also implement a chatbot into the chat system as well? Have anyone tried these two and had experience with it? Thank you Sincerely, Robert Leoby RobertLeo - WinDev Forum
Popoy Wrote: ------------------------------------------------------- > Look here in french > Thanks for the reply Popoy, correct me if I am wrong but basically we need to recompile the project into Xcode 11? And that the alternative way for this is to create an action bar?by RobertLeo - WinDev Forum
Greetings all, I am not sure on what is wrong but when I tried to deploy my app into iOS, whenever I try to open a new window using the OpenMobileWindow(TargetWindow) code, instead of opening a new full screen window, it opens a small pop up sized window that I can even drag it to different positions on the screen, is there anything wrong with my usage of code for the iOS version?by RobertLeo - WinDev Forum
I don't think it may be caused by a permissions issue, at least I am not sure if that's the case because the HTTPrequest is coded in the WM app, even after adding permission; android.permission.INTERNET the error still appears Snippet of the code I used: ResStart is string ResStart = HTTPRequest(" IF ResStart = True THEN ResCode is string = HTTPGetResult() Info("HTby RobertLeo - WinDev Forum
Hello Argus, I tried this method however I got an error message that said; System error sending HTTP Request. Details of system error rotocol not supported any ideas?by RobertLeo - WinDev Forum
Hello Argus, Thanks for the reply, I'll give this method a try, thanks! Argus Wrote: ------------------------------------------------------- > if you need to do things that aren't possible > directly in wm java global procedure (callbacks, > by example), you can try to proceed another way: > - in an external tool (eclipse, android studio, > etc), you create aby RobertLeo - WinDev Forum
Hello guys, I am attempting to bridge my app with a local payment gateway, but there is one problem, the code they have provided is in JAVA that works in Android Studio (because it was made for it), but it is uncertain in Windev even after using the instructions given in this so is there any other way to integrate the JAVA codes into WM, and is there any way to see if the data has been senby RobertLeo - WinDev Forum
Argus Wrote: ------------------------------------------------------- > if you are already doing it, you are not doing it > the right way or at the right place... > > Put your code in a thread, do it in advance, do it > later when the user scrolls, there are many ways > of managing the problem... it all depends of all > the things you are not telling us. I have 2 aby RobertLeo - WinDev Forum
DarrenF Wrote: ------------------------------------------------------- > Hey Robert, > > You don't tell us what your infrastructure is? > > Are you loading your data from a remote DB or from > within the App? > Are you using mobile data? > If so is it local wifi (during testing) or it it > 3G, 4G etc...? > Just how much is a "big chunk" ofby RobertLeo - WinDev Forum
Argus Wrote: ------------------------------------------------------- > AFAIK, pull to refresh does just that, when the > users PULLS on a looper, data is loaded. > > That has NOTHING to do with refreshing a looper > when new data appears in the DB... > > For that, you need a timer and some code > (hversion, by example, but not limited to) to > check if thereby RobertLeo - WinDev Forum
Argus Wrote: ------------------------------------------------------- > Of course there is... load whatever you need in > queries, arrays or anything else you like, and in > whatever window you have, read them from there. that's what I do at the moment, problem is whenever the screen with said queries appear, the app would pull all of the data in relation to that from the databy RobertLeo - WinDev Forum
Greetings, I have an issue with windev mobile app in which when attempting to open a window that requires pulling a big chunk of data, it takes a very long time to load. To make a long story short, we used a looper to call in menus and these menus are loaded with links and calls to multiple other windows and would open them when said looper is pressed, and the process to load this window wiby RobertLeo - WinDev Forum
Hello guys, I am currently having an issue with data and refreshing, currently my app is able to add/remove data from the database, however it would take a while for that data to appear in the app itself (whilst it was instantaneous in the database) so I reckon that this is a refresh issue, but after activating pull to refresh it doesn't do that, so any ideas on what am I doing wrong?by RobertLeo - WinDev Forum